Why Has The Vacuum Cleaner Lost Its Suction?

Why Has The Vacuum Cleaner Lost Its Suction?

Decreased suction in the vacuum cleaner is one of the most common problems in the vacuum cleaner. But fortunately, this problem is one of the problems that can be solved almost easily and at a low cost. In this article from the RepairLand website, we look at the causes of vacuum cleaner lost suction, as well as ways to fix the problem.

The vacuum cleaner will not pick up dirt, what is the reason?

  • Dirty filters
  • Blockage or rupture of the vacuum cleaner hose
  • Vacuum cleaner bag is full
  • The vacuum cleaner paddle is not in the correct position
  • Motor failure

Dirty filters

Dirty filters can be one of the reasons for lost suction in the vacuum cleaner. A dirty filter prevents air from flowing as it should, thus losing the suction power of the vacuum cleaner. It also prevents the vacuum cleaner from cleaning the floor well. Of course, before any inspection and repair of the vacuum cleaner, it is better to unplug the vacuum cleaner first, then remove all the vacuum cleaner filters. Most vacuum cleaners have two filters, one of which is to remove dust from the motor and the other is an outlet filter. Some filters are washable, so wash them well. Some other filters can be gently cleaned with a brush and some can be replaced completely.

Blockage or rupture of the vacuum cleaner hose

Blockage or rupture of the vacuum cleaner hose

Occasionally there is a lack of suction power in the vacuum cleaner due to blockage or rupture of the vacuum cleaner hose. Therefore, you should carefully inspect the hose of the vacuum cleaner and if there is an obstruction in the path of the hose, you should remove it, as well as if the hose had a hole or tear, you should replace it, because any hole or Rupture lost suction power, as well as noise. Note, however, that sometimes the vacuum cleaner hose may not be obstructed, but the obstruction may be at the junction of the hose to the vacuum cleaner or at the junction of the paddle. So you have to remove the base of the vacuum cleaner and check it.

Vacuum cleaner bag is full

Vacuum cleaner bag is full

If the vacuum cleaner bag is full, the suction power of the vacuum cleaner will be very low, and even the vacuum cleaner may not have suction at all, and if used in this situation, it may put pressure on the motor and cause the motor to burn. In cordless vacuum cleaners, which usually do not have a bag, but have a small container for collecting dust, this container should be emptied quickly and the existing filters should be cleaned regularly. The suction of the vacuum cleaner may also be lost if the vacuum cleaner bag is torn. Therefore, it is very necessary to check the vacuum cleaner bag when the suction of the vacuum cleaner is lost.

The vacuum cleaner paddle is not in the correct position

The vacuum cleaner paddle is not in the correct position

Another reason for the lost suction of the vacuum cleaner is that the vacuum cleaner paddle is not in the correct position. There is a chassis on the paddle, which determines whether you are sweeping the carpet or ceramic or parquet, so be careful to place it in the correct position so that the vacuum cleaner sucks properly.

Sometimes things like paper, hair, etc. may be stuck in the vacuum cleaner. In this case, you need to remove all these wastes. After cleaning all these wastes, try the vacuum cleaner again. If the suction problem persists, you should show the vacuum cleaner to a vacuum cleaner repair technician.

Motor failure

Sometimes the cause of lost vacuum cleaner suction can be due to breakdown and problems related to the vacuum cleaner motor. If the vacuum cleaner motor fails, the vacuum cleaner loses its suction power. In addition to losing the suction power, one of the symptoms of a vacuum cleaner motor failure can also be smoke.

Also, the motor itself may not be damaged, but the motor blades may be damaged. The motor blades allow dust to pass through the blades and into the vacuum cleaner bag. However, if the motor blades are damaged or broken, the motor may become noisy or vibrate, resulting in loss of suction. In this case, you have to replace the motor blades.

Additional tips on the cause of lost vacuum cleaner suction

  • You must unplug the vacuum cleaner before any inspection.
  • If you are not familiar enough with the vacuum cleaner, it is better in case of any problem, show the vacuum cleaner directly to the vacuum cleaner repairman to find out the problem and fix the problem.
  • Do not repair the vacuum cleaner at all if you do not have sufficient skills and expertise in the field of vacuum cleaner repair, as it may cause the vacuum cleaner body and other components to break, and cause irreparable damage to the vacuum cleaner.
  • Also note that sometimes, and in some situations, such as burning the vacuum cleaner motor, buying a new vacuum cleaner is better and more economical than repairing it, which of course you can make this decision according to the cost stated by the repairman.

We become happy that you share your comments with RepairLand website.

5/5 - (1 vote)

Leave a Comment

Your email address will not be published.