Washing Machine Fills Slowly Or Will Not Fill At All?

Washing Machine Fills Slowly Or Will Not Fill At All?

When the washing machine does not fill with water, most of the time, with the help of some specialized tools, you can find the cause of the washing machine not filling and fix it. Because this is a simple problem that has occurred on your device. There are several reasons why your washing machine does not fill with water, some of which are easy to solve while others are complex and require the services of a specialist laundry repair specialist. Does the laundry not fill or does it enter slowly? So stay tuned to the RepairLand website.

Why does the washing machine not fill with water?

Imagine that you have a lot of dirty clothes and you go to your washing machine to wash them. But after placing the clothes in the drum of the machine and choosing the washing program, the washing cycle does not start and you notice that your washing water fills slowly or does not fill. No doubt you are nervous and your discomfort is understandable; However, if you know the reason why water does not enter the washing machine, you can make a better decision and in some cases, solve the problem.

Why does the washing machine not fill with water?

Washing machine water filters and hoses

With the help of rubber hoses that are connected to the city tap to supply water, the water enters the washing machine. Sometimes even the length of these hoses reaches 2, 3 meters. Also, at the end of the hose and at the connection to the valve, there are small filters that are used to prevent deposits and materials in the water from entering the device and the solenoid valve.

Therefore, one of the first things that should be considered in case of problem of slow filling or not filling the washing machine water, are water supply hoses and filters. The hose may become clogged due to cracks or tears in the hose, or twisting or trapping of a foreign object in it, causing the washing machine water to fill or not fill slowly. Strainers or filters can also pass less water due to settling and accumulation of sediment.

First make sure the valve is open and then check the items mentioned above. You can open the hoses from the washing machine and put the other end of them in a bucket to make sure that the water entering the machine is not pressurized and that the hoses are not blocked. Replace the existing hose or strainer if necessary.

Household water supply valve

The reason why water does not enter the washing machine is because of the faucet in your house. First, make sure the valve is open, and if you suspect that the valve is blocked, replace it.

Washing machine solenoid valve

The solenoid valve or water inlet valve is the most important part in the problems related to not filling the washing machine with water. If the water inlet valve on the back of the washing machine breaks down, the machine may fill slowly or not at all. It may also cause the washing machine to overfill. In addition to the proper voltage, the water inlet valve needs sufficient water pressure to function properly.

If the water pressure behind the valve is appropriate, you should make sure that it is powered by a multimeter and the voltage of its solenoids can be measured. This voltage measurement should be done during the operation of the device and during the water filling stage, which is recommended to be performed only by a skilled repairman due to the dangers of electric shock. If the voltage of the washing machine solenoid valve is suitable, the faulty valve itself is the cause of the problem and should be replaced by a skilled repairman. If the voltage does not reach the water inlet valve, then the components that control the solenoid valve should be checked.

The solenoid valve of the washing machine is controlled by a timer or electronic board and a pressure switch or water level switch. Therefore, if the electricity does not reach the valve, there may be a problem with one of these components.

Water level switch or pressure switch

The water level switch, which is a pressure switch, controls the voltage input to the solenoid valve. In fact, current flows from the timer or electronic board to the pressure switch and from this part to the solenoid valve. After the amount of water in the washing machine drum reaches the appropriate amount, the pressure switch cuts off the flow from the solenoid valve and stops the dewatering, and then the flow is directed to the motor and the spinning phase begins.
If the water level switch has a problem, it may cut off the flow from the solenoid valve before the water reaches the right amount, or it may do so from the beginning, in which case it must be replaced. Checking the health of the switch with a multimeter may be specialized and should be performed by an experienced repairman.

Selector, timer or electronic board

Mechanical timers are used in older models of washing machines, and newer models use electronic boards instead. The timer or board is responsible for directing the electric current to various parts, including the solenoid valve, which does this during the water filling stage.

If there is a fault in the timer or board, the voltage required for the operation of the solenoid valve may not reach it and water may not enter the washing machine. The solution in this case is to replace the timer or board. To test the timer, the voltage of the timer contacts or the electrical terminals of the board must be measured during the dewatering step. This measurement should be performed by a qualified repairman due to the risk of electric shock.

water pressure

As mentioned earlier, a washing machine solenoid valve requires a minimum water pressure of about 20 psi to function properly. Therefore, low water pressure in the house in some cases can be a problem and prevent water from entering your washing machine.

We become happy that you share your comments with RepairLand website.

Rate this post

Leave a Comment

Your email address will not be published. Required fields are marked *